32Bit Wraith32 BLHeli ESC Started Shipping Out

The first ESC that supports BLHeli_32 has already been announced – the Wraith32 and Wraith32 Plus by Airbot and FPV Model.

Wraith32 Plus is a BLHeli_32 50A ESC that comes with a 6S powerhouse that supports voltage limiting and current limiting as well as a bright RGB LED. Wraith32 comes with a smaller 6S version that also supports voltage limiting and current limiting as well as a bright RGB LED.  The Plus has double mosfet (12pcs. instead of 6pcs.),  so it works better on a high current.

FPV Model has started taking the pre-orders on these two BLHeli_32 ESCs. You are having a chance to be the first one in the world receiving the ESCs. From May 10th, the pre-orders of Wraith32 have already been started shipping out.

 

X-Racer Quadrant 4 in 1 ESC

Hello all, we are going to release a new ESC that powered by high performance EFM8BB21 MCU, and flashed with BLHeli_S program. It supports multishot/one shot42/oneshot125. With 25AMp constant RMS (30A max) and supports 4-6s.

One main charateristic of the X-Racer ESCs is that, the four tiny ESCs can be installed seperately on the arms, but also can be installed together like a PCB under the flight controller.

The X-Racer ESCs can be considered as 4-in-1 ESCs, but not the same to other 4-in-1 ESCs that only can be used on one PCB. One disadvantage of other 4-in-1 ESCs is, if one part of the ESC damaged, then the whole PCB have to be changed. It would be too much trouble to the pilots.

But there will be no problem with X-Racer ESCs. The four tiny ESCs can be used together or seperately. Even one is damaged, you just need to change one, no need to change the whole PCB. (Although we don’t believe the ESC would easily damaged.)

Main Characteristics:

1. Can be installed seperately on the arms, or 4 ESCs installed together like a PCB under the flight controller.
2. With 25AMp constant RMS, 30A max.
3. 4-6s Lipo
4. Powered by high performance EFM8BB21 MCU
5. Flashed with BLHeli_S program. It supports multishot/one shot42/oneshot125.

X-Racer F303 FC has been one of the most popular flight controllers in FPV community, and we hope you will like this new ESC as well. Please let us know what you think. You may have the chance to be the first to receive the ESCs and surely FOR FREE!!!.

Thank you.

FPV Model
http://www.fpvmodel.com

Skyzone Released New Version 3D FPV Goggles

On July 25th, Skyzone released a new version of 3D FPV Goggles named SKY02 V+. It has a new feature of channel auto-searching which does not exisit in previous versions of Skyzone 3D Goggles.

Skyzone SKY02S V+ 3D FPV goggles are built-in with two 5.8GHz receiving modules, two antenna ports and two independently-working display modules, bringing you 3D FPV flight experience (SCAM302 3D camera and STX202 two-way transmitters required). The two lens of the 3D camera work in the parallel manner so that 3D effect can be enhanced for close shot and reduced for long shot, bringing people an overall vivid visual experience of FPV.

SKY02S V+ 3D FPV glasses can also work in routine diversity reception mode. In such mode, it displays common 2D images. Its radio channel and band settings may be compatible with STX202 and other 5.8GHz transmitters, and in total it supports bands and 40 channels.

You can find more information about the product at Skyzone. Also you can Order Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles from FPVModel.com.

 

New Product: FPVModel 5.8G Explorer Dual Diversity Receiver

Built around the open source Pro Diversity open source design for a dual diversity setup with a large design footprint with good separation between modules and better heat dissipation, this all in one package is designed to give you great signal reception rather you are flying long range or inside confined indoor tracks and need help dealing with likely multipathing issues.

FPVModel 5.8G Explorer Dual Diversity Receiver features an OLED display (Organic Light Emitting Diodes), automatic channel scanning, spectrum analyzer, and built-in dual diversity receivers. All of the features are controlled via a main jog wheel that enable the user to navigate the menu and sub screens with ease.

Here’s a list of features that can be controlled via themenu system:

SCANNER
Scan the spectrum of all 40 channels forFPV usage.

Jog Wheel Navigation
Three way navigation wheel. Up, down, pushinward.

Search Mode
Search channel based on strength.

Manual Mode
Set the channel manually.

Save Channel
This feature allow the system to start upwith the last used channel being saved into memory.

Pilot Display
This screen displays call sign, signalstrength, and shows current used receiver.

Settings Menu
Set call sign name, calibrate RSSI, selectfrequency order, save channels.

Dual Diversity

FPVMODEL 5.8G Explorer features two built-in receivers and this will give the user an additional level of protection and allows for combining antennas that can be used to suit the given application such as directional and omni-directional, allowing for great signal reception rather you are flying near and around yourself or going for long range and need that directional antenna to get you there. The two modules work together and do not need any special adjustments to be completed by the user, simply put they just work together.

In conclusion this package is designed to give the user an affordable alternative to a clear view of their FPV feed. Small enough to travel with and large enough for good antenna separation this package will give you the sight you need while you’re up in the air, find it at fpvmodel.com and get yours today.

For more information of the product, please check it out at http://www.fpvmodel.com/fpvmodel-dual-channel-5-8g-40-channel-competitive-version-receiver-built-in-dvr_g1167.html.

Original from: http://www.fpvmodel.com/blog/new-product:-fpvmodel-5-8g-explorer-dual-diversity-receiver_show141.html

FPVmodel.Com Now Stocking Littlebee 20A ESC

FVT Littlebee 20A ESC has been well received in the market and it is considered to be the most closest competitor to KISS ESC.

It is a super compact, lightweight, high performance speed controller for your racing multi-rotor. Pre-flashed with BLheli and ready to use with Oneshot (aka oneshot125 / PWMsync) mode via compatible flight controllers running Cleanflight or similar.

Specifications:

Input: 2-4s Lipo
Constant: 20 Amps
Burst: 30 Amps
Weight: 4g
Dimensions: 23×12.5x3mm
Motor wire: 70mm
Signal wire: 120mm
PCB – 4 Layer Blind Pole PCB – 3oz Pour
Mosfet: All N channel
BEC: None

Why choose LittleBee?

High Performance: LittleBee is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional brakign capabilities.
High Reliability: The manufacturer FVT uses the best components ever. Besides, FVT has a strong R&D team and its own modernized factory to guarantee the reliability.
Small Size: LittleBee is only 24.5×12.5mm, and weights only 4g, enabling your builds to be even smaller and lighter!

This image has been resized. Click this bar to view the full image. The original image is sized 1292×892.

How it works?

Configuration of the LittleBee is very simple. Using your pc and USB programmer, you can change settings and flash latest firmware at a touch of a button.

Download and install software: You will need to download the BLHELI suite, and the drivers required by your USB Programming tool.

This image has been resized. Click this bar to view the full image. The original image is sized 820×703.

Connect ESC and configure settings: Once connected, you will get access to a number of settings that control behaviour of your ESC controller.
Enable OneShot125, Damped light mode, reverse motor direction, all available on one easy to use screen.

This image has been resized. Click this bar to view the full image. The original image is sized 800×600.

Where to buy?

FPV Model: http://www.fpvmodel.com/fvt-littlebe…4s-_g1082.html

ZMR180 3K Carbon Fiber Mini Quad Released By FPV Model

With small yet full functional FPV, ZMR250 has gained a lot of popularity since its releasing. However, we have received many request of aksing for smaller airframe. Therefore, to meet some FPV enthusiasts requirement, we decided to design a smaller FPV airframe that deserves the ZMR lable. After a lot of tests and revisions, finally the ZMR180 released. Now both ZMR180 frame kit and ZMR180 ARF are available.

The ZMR180 is a symmetric 18mm size airframe that accommodates 4″ props. The 180mm is measured motor shaft to motor shaft diagonally.

Agile, quick and small all fit together with this kit and its a blast to fly. The ZMR180 is a micro quad designed with “fun” in mind. The ZMR180 frame has high quality 3mm bottom plate and a 1.5 mm top plate. Using the same carbon fiber that you find in ZMR250 V2, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with FPVMODELs name so you can trust that it is top of the line. The ZMR180 is an awesome time to be had and you will find the smaller size can zoom through gaps that were previously not even considered with a 250 sized quad. The ZMR weighs in at 72g including the given mounting hardware and spacers allowing for an ultra-light weight build yet leaving plenty of build room for adding all necessary FPV gear. If you wanna add more muscle, pick the ZMR180 with the larger mounts for 22xx motors.

Hurry up and get yours now, they are “flying” off the shelves.

Original Post: http://www.fpvmodel.com/blog/zmr180-mini-quad-released_show120.html

ZMR250 V2 Mini Quad Frame w/Full PDB Released

zmr250

FPV Model has newly released a new upgraded ZMR250 V2 with full PDB & LED.

FPV Model has taken the time to make sure that this is the ZMR you want. The frame has been reworked to include both top and bottom plates are “true” 2mm plates. Also the 4mm thick arms are included in the package, so there is no need to buy them seperately.( 4mm arms can be found running anywhere from 6-15 dollars each!)

The carbon fiber has been sourced and quality checked to ensure that you are getting the best quality 3k carbon fiber around. Including a full PDB w/LED lighting system you cant find a better deal out there! Introducing the ZMR250 V2!!!

Weight: Frame, hardware, and PDB total 185 grams

Features:

  • “True” 2mm Top & Bottom Plates
  • 4mm Thickness on Arms for Added Durability
  • Full PDB w/LED

ZMR250 V2http://www.fpvmodel.com/zmr250-v2-250mm-carbon-fiber-mini-fpv-quadcopter-frame-kit-with-pcb-board-and-led_g1005.html

281415

v2-6v2-7v2-8v2-9