New Product: FPVModel 5.8G Explorer Dual Diversity Receiver

Built around the open source Pro Diversity open source design for a dual diversity setup with a large design footprint with good separation between modules and better heat dissipation, this all in one package is designed to give you great signal reception rather you are flying long range or inside confined indoor tracks and need help dealing with likely multipathing issues.

FPVModel 5.8G Explorer Dual Diversity Receiver features an OLED display (Organic Light Emitting Diodes), automatic channel scanning, spectrum analyzer, and built-in dual diversity receivers. All of the features are controlled via a main jog wheel that enable the user to navigate the menu and sub screens with ease.

Here’s a list of features that can be controlled via themenu system:

Scan the spectrum of all 40 channels forFPV usage.

Jog Wheel Navigation
Three way navigation wheel. Up, down, pushinward.

Search Mode
Search channel based on strength.

Manual Mode
Set the channel manually.

Save Channel
This feature allow the system to start upwith the last used channel being saved into memory.

Pilot Display
This screen displays call sign, signalstrength, and shows current used receiver.

Settings Menu
Set call sign name, calibrate RSSI, selectfrequency order, save channels.

Dual Diversity

FPVMODEL 5.8G Explorer features two built-in receivers and this will give the user an additional level of protection and allows for combining antennas that can be used to suit the given application such as directional and omni-directional, allowing for great signal reception rather you are flying near and around yourself or going for long range and need that directional antenna to get you there. The two modules work together and do not need any special adjustments to be completed by the user, simply put they just work together.

In conclusion this package is designed to give the user an affordable alternative to a clear view of their FPV feed. Small enough to travel with and large enough for good antenna separation this package will give you the sight you need while you’re up in the air, find it at and get yours today.

For more information of the product, please check it out at

Original from:


FPVmodel.Com Now Stocking Littlebee 20A ESC

FVT Littlebee 20A ESC has been well received in the market and it is considered to be the most closest competitor to KISS ESC.

It is a super compact, lightweight, high performance speed controller for your racing multi-rotor. Pre-flashed with BLheli and ready to use with Oneshot (aka oneshot125 / PWMsync) mode via compatible flight controllers running Cleanflight or similar.


Input: 2-4s Lipo
Constant: 20 Amps
Burst: 30 Amps
Weight: 4g
Dimensions: 23×12.5x3mm
Motor wire: 70mm
Signal wire: 120mm
PCB – 4 Layer Blind Pole PCB – 3oz Pour
Mosfet: All N channel
BEC: None

Why choose LittleBee?

High Performance: LittleBee is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional brakign capabilities.
High Reliability: The manufacturer FVT uses the best components ever. Besides, FVT has a strong R&D team and its own modernized factory to guarantee the reliability.
Small Size: LittleBee is only 24.5×12.5mm, and weights only 4g, enabling your builds to be even smaller and lighter!

This image has been resized. Click this bar to view the full image. The original image is sized 1292×892.

How it works?

Configuration of the LittleBee is very simple. Using your pc and USB programmer, you can change settings and flash latest firmware at a touch of a button.

Download and install software: You will need to download the BLHELI suite, and the drivers required by your USB Programming tool.

This image has been resized. Click this bar to view the full image. The original image is sized 820×703.

Connect ESC and configure settings: Once connected, you will get access to a number of settings that control behaviour of your ESC controller.
Enable OneShot125, Damped light mode, reverse motor direction, all available on one easy to use screen.

This image has been resized. Click this bar to view the full image. The original image is sized 800×600.

Where to buy?

FPV Model:…4s-_g1082.html

ZMR180 3K Carbon Fiber Mini Quad Released By FPV Model

With small yet full functional FPV, ZMR250 has gained a lot of popularity since its releasing. However, we have received many request of aksing for smaller airframe. Therefore, to meet some FPV enthusiasts requirement, we decided to design a smaller FPV airframe that deserves the ZMR lable. After a lot of tests and revisions, finally the ZMR180 released. Now both ZMR180 frame kit and ZMR180 ARF are available.

The ZMR180 is a symmetric 18mm size airframe that accommodates 4″ props. The 180mm is measured motor shaft to motor shaft diagonally.

Agile, quick and small all fit together with this kit and its a blast to fly. The ZMR180 is a micro quad designed with “fun” in mind. The ZMR180 frame has high quality 3mm bottom plate and a 1.5 mm top plate. Using the same carbon fiber that you find in ZMR250 V2, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with FPVMODELs name so you can trust that it is top of the line. The ZMR180 is an awesome time to be had and you will find the smaller size can zoom through gaps that were previously not even considered with a 250 sized quad. The ZMR weighs in at 72g including the given mounting hardware and spacers allowing for an ultra-light weight build yet leaving plenty of build room for adding all necessary FPV gear. If you wanna add more muscle, pick the ZMR180 with the larger mounts for 22xx motors.

Hurry up and get yours now, they are “flying” off the shelves.

Original Post:

ZMR250 V2 Mini Quad Frame w/Full PDB Released


FPV Model has newly released a new upgraded ZMR250 V2 with full PDB & LED.

FPV Model has taken the time to make sure that this is the ZMR you want. The frame has been reworked to include both top and bottom plates are “true” 2mm plates. Also the 4mm thick arms are included in the package, so there is no need to buy them seperately.( 4mm arms can be found running anywhere from 6-15 dollars each!)

The carbon fiber has been sourced and quality checked to ensure that you are getting the best quality 3k carbon fiber around. Including a full PDB w/LED lighting system you cant find a better deal out there! Introducing the ZMR250 V2!!!

Weight: Frame, hardware, and PDB total 185 grams


  • “True” 2mm Top & Bottom Plates
  • 4mm Thickness on Arms for Added Durability
  • Full PDB w/LED

ZMR250 V2



Spare Parts of Skyzone 3D Goggles Available for Purchasing Seperately

The 3D camera, dual transmitter and goggles for the Skyzone 3D Goggles set now can be purchased seperately.Just simply replace them if there’s any missing or damage.

Please note that if you want a full functional 3D goggles, you’ll still need to purchase the whole set of Skyzone 3D Goggles.


Goggles only (White Version):


3D Camera:


Dual Transmitter:

RaceGates Changed FPV Mulirotor Races


Original Post:

FPV Model just released the RaceGates that specially designed for FPV Racing with mini multirotors. The race gates are now available for sale at the official website of FPV Model:

FPV Racing becomes more and more popular in recent years. The events can be found in many places. Most of the racing events are held in the woods, racing with  ZMR250 and QAV250 or other mini quads in similar sizes.  Now, with the releasing of FPVModel RaceGates, the racers have more than one choice other than to race in the woods, they can also setup the race gates and simply enjoy the racing on the park.


The FPVModel RaceGates comes with a special reflective material on the edge of the inner arch allowing the racers continued visibility throughout the night. If you like to fly after sunset, it could be a very cool choice. What about race with both FMX250, a LED mini quad, and  these RaceGates? The feeling must be very special.

The price for FPVModel Racegates is also very attractive. Only $62.99 per set, and it includes free DHL shipping!!! If you choose the 3-pc starter package and 6-pc advanced packages, you’ll save more.

The seller FPV Model also mentioned on their product page, if the MOQ allowed, the Race Gates can be customized and come with special logo printing service.ial logo printing service.

Skyzone Released a White Version 3D FPV Goggles

Skyzone newly released a white version Skyzone SKY02 3D FPV goggles. This white version also named FPVModel special edition, is specially made for FPVModel fans. Customers now can purchase this special edition at
The special edition Skyzone 3D goggles are designed based on the latest V2 version of Skyzone SKY02 3D FPV Goggles which has solved the issues of IPD adjustment, video recording and head tracking. They are white, so they don’t fry your face off in the sun and you are having one more choice other than the traditional black goggles.
The colour of main body has been changed from black to white which not only looks great but also very practical as it will help prevent them from over-heating on hot sunny days (which was very common).
These Special Edition Skyzone Goggles are now only available for sale at As a special thank you to Skyzone fans, the dealer FPV Model will include free DHL Shipping. Customers now can order the special edition at
ne Goggles are now only available for sale at As a special thank you to Skyzone fans, the dealer FPV Model will include free DHL Shipping. Customers now can order the special edition at