Free Flight O8 High-end Octocopter Newly Launched

FPV Model is proud to annouce that Free Flight O8 High-end Octocopter is now available for sale. For the details, please check http://www.fpvmodel.com/free-flight-o8-high-end-octocopter-with-retractable-landing-gear-and-removable-arms_g769.html.

Parameters:

Frame:

Diagonal wheelbase:1100mm
Single arm weight (with motor, ESC, prop)：800g
Center frame size：240mm（L）x 185mm（W）x 60mm（H）
Center frame weight (With landing gear and mount): 980g
Landing gear size:410mm（L）×470mm（bottom width）×（430）mm（H）
（top width：260 mm）

Motor:

Free Flight 4114 KV400

Stator size:（41）×（14）mm
KV:（400）rpm/V
Max power: 500W

ESC:
Worrking current:40A
Worrking voltage:6S LiPo
Compatible signal frequency :30Hz ~ 450Hz
Drive PMW frenquency:8KHz

Prop:

1555 CW/CCW

Material:Carbon Fiber
Size:15×5.5inch

Flying parameters:

Take off weight:（6）Kg ~ （13）Kg
Whole weight:（4.2）Kg
Battery: LiPo（6S、10000mAh~20000mAh、Min 15C）
Max consumption:（4000）W
Hoveing power consumption：1500W（Take off weight 10Kg)
Hovering time:（16）min（15000 mAh,take-off weight 10Kg）
working temperature:-10 °C ~ +40 °C

Recommended sensitivity of flight controller:

A2：
Base：roll 120%、pitch 120%、direction 120%
Attitude ：170%、pitch 170%、vertical120%
WooKong-M：
Base：roll180%、pitch180%、direction160%
Attitude：roll180%、pitch180%、vertical120%

As a professional supplier of FPV, we’ll continue to do our best offerring the best possible FPV products at best possible price, yet with best possible service.

Save $810 on Free Flight X8 High-end Quadcopter

Thanks to the great support from our customers from worldwide, we are able to get Free Flight series high-end quadcopters at a very good price based on the large quantity.

Now customers who buy Free Flight X8 high-end quadcopter from FPV Model will get a free Naza-M V2 flight controller.

Free Flight X8 is a superb aerial platform designed for use with professional cameras that require a heavy lift multirotor. We believe this quadcopter can meet your professional demands on FPV flying.

Naza-M V2 flight controller is proud of its excellent flight performace with its new firmware, new attitude stabilization algorithm and optimized hardware structure.

The original price for Free Flight X8 is US$1899.00, price for Naza V2 flight controller is US$319.90. Now a free flight X8 with naza v2 only cost US$1405.26. It means you’ll save more than $810 on this high-end quadcopter.

Don’t miss this opportunity and take advantage of this special offer. Check the high quadcopter at:

http://www.fpvmodel.com/free-flight-x8-high-end-octocopter-with-retractable-landing-gear-and-removable-arms_g723.html

To know other FPV hobbyists’ comments on this quadcopter,  you can now join the discussion on RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2211112.

Save Up to $800.00 on High-end Quadcopters from FPV Model

FPV Model launched a promotion campaign for Free Flight X4 and Free Flight X8 last week. Thanks to our customers’ continuous support, many were sold out.

Both Free Flight X4 and Free Flight X8 are superb aearial platforms designed for use with professional cameras that require a heavy lift multirotor.

Although the promotion campaign has ended, we still receive many inquiries about these high-end quadcopters. Therefore, we’d like extend the special offer for a longer duration of time.

Now, customers who buy Free Flight X4 or Free Flight X8 high-end quadcopter will get a free Naza V2 flight controller.

The original price for Free Flight X4 is US$1299.00, price for Naza V2 flight controller is US$319.90. But now a free flight X4 with naza v2 only cost US$1104.15. It means you’ll save about $515 on this high-end quadcopter.

 

The original price for Free Flight X8 is US$1899.00, price for Naza V2 flight controller is US$319.90. Now a free flight X8 with naza v2 only cost US$1405.26. It means you’ll save more than $800 on this high-end quadcopter.

Don’t miss this opportunity and take advantage of this special offer. Check these high quadcopters at:

http://www.fpvmodel.com/free-flight-x8-high-end-octocopter-with-retractable-landing-gear-and-removable-arms_g723.html

http://www.fpvmodel.com/free-flight-x4-high-end-quadcopter-with-retractable-landing-gear-and-removable-arms_g704.html

Or you can follow the discussion on RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2211112.

Apology for Delay Shipping of ZMR250 ARF Packages

Hello guys, thank you very much for purchasing the Promotional ZMR250 Mini Quadcopter ARF package from FPV Model.

In the past 10 days, many sets of these ARF packages were sold out. Due to the 7 days public Chinese National holiday, we failed to ship some of the ARF orders in time. Please accept our apology for the delay. We will honor all orders placed at the promotional price and extend the offer for a longer duration of time.

We are now trying our best to ship all the orders within 5 days. Appreciate so much for your patience and thanks for your kind understanding.

http://www.fpvmodel.com/zmr250-250mm-mini-quadcopter-fpv-arf_g762.html

ZMR250 250mm Mini Quadcopter FPV ARF Package Sold at US$199.99

Only US$199.99 for a whole FPV ARF package!!!

Three options of flight controller: Naze 32 Acro, Naze 32 Full, or the CC3D.

The FPV ARF Package is now available at http://www.fpvmodel.com/zmr250-250mm-mini-quadcopter-fpv-arf_g762.html.

An affordable Mini ARF package that comes complete with heat shrink, cable sheathing, FC w/ PID settings and full FPV gear for the quad frame. What do you think? Refer to my previous post http://fpvplane.blogspot.hk/2014/09/an-affordable-mini-arf-package-will-be.html 

This FPV ARF package comes with ZMR250 carbon fiber frame. 250mm. Carbon Fiber has a nice sheen to the finish and all tooling edges are nice and smooth. Using Dragonfly MC1806 2300kv Mini Motors.

All up weight 498g.

This is a ZMR250 FPV ARF combo, It includes almost everything you need for your building work with ZMR250. Don’t worry what you need and just enjoy the  building process, we provide you with a promotion price and make sure you will get a perfect flying experience with our ARF package.

Package Includes:

ZMR250 250MM mini quadcopter frame kit x 1

DragonFly MC1806 KV2300 motor x 4

ZTW Spider 12a ESC x 4

5030 electric CW/CCW props x 4 pairs

Naze32 Acro Funfly flight controller x1 (or CC3D Flight Controller or Naze 32 Full version flight Controller).

SONY Effio-e 4140+811 1/3 CCD 2.6mm Lens 700TVL camera x 1

AOMWAY 5.8g mini 200mw 32CH transmitter x 1

Battery velcro straps x 2

5.8G clover 3-leaf TX antenna x 1

20CM servo extension cable x 2

3M double sided adhesive tape x1

Also, silicon wires, straps, shrink tubes, T-plug etc that everything as showed in above pictures.

What else you need (choice which you prefer from our website):

Radio, battery (3s 1300-2200mah), receiver and monitor.

FY-G3 Ultra Handheld Gimbal User Manual

FeiYu FY G3 Ultra 3-Axis Steady Handheld Brushless Gimbal For Gopro 3/3+

Unit Price: US$349.00 (Free Shipping)

The following article is abstracted from http://www.fpvmodel.com/feiyu-fy-g3-ultra-3-axis-steady-handheld-brushless-gimbal-for-gopro-3-3-_g667.html.

Function Instruction

● Heading Following Mode —— Pitch and roll locking, heading smooth rotation follow the direction of the handheld.

● Heading And Pitch Following Mode —— Roll locking ,heading and pitch smooth rotation follow the direction of the handheld.

● Locking Mode —— Heading ,pitch and roll locking.

Identify the operation mode via switch to different status of the indicator light.Please check detailed indicator diagram below。

How To Use The Button

 

Identify the operation mode via switch to different status of the indicator light. Please check detailed indicator diagram below。

Operation Skill

The Skills Of Adjusting Pitch: Double click the button first to be in heading and pitch following mode. Adjust the attitude to move the pitch to the angle you want, then press the button once to lock the angle of pitch being in the heading following mode .

Autodyne Mode: Trun 180 degree of the gimbal (the USB port facing you). Adjust the angle of pitching through the method above, then you can autodyne easily.

Initialize The FY-G3 Ultra Gimbal

FY-G3 Ultra Gimbal needs to be initialized when the following situation appears:

1.  After power on, the angle of pitch has a little angle difference with the horizon line.

2.  After power on, the angle of roll has a little angle difference with the horizon line.

3.  When the heading is in the till condition, the angle of heading amends frequently in a small angle .

【 The method of initializing the FY-G3 Ultra Gimbal 】

Keep the gimbal in the still condition, then power on , it will initialize automatically.After that the gimbal can work normally.

The Maximum Rotation Angle Of The Axis

Note: Before you power up your gimbal,please mount the Gopro on first,,or it will cause the vibration. For brushless gimbal, please check it out at FPV MODEL. FPV Model is a professional B2C dealer of FPV plane and anything related to FPV.

• FY-G3Ultra Handheld Gimbal Manual 20140613.rar

Special Offer on Power Combo for Mini Multirotors

Original sold at US$131.52 totally, now only US$98.90 for a package sale.

This is the newest promotional power combo for mini multi-rotors. This combo as been specifically chosen to have all parts paired for excellent preformance.

Featuring Gem Fan props that can mount to the DragonFly MC1806 KV2300 motor 4mm shaft adapter and ZTW V2 12A ESCs that have Spyder firmware specially programed for high kv motors. The firmware on the ESCs has been designed to match the high kv rating of the motor so you do not have to worry about any sync issues throughout throttle range.

If you’re looking for a power package designed for mini multis in the 230-280 size then look no further. We have put the time and effort into ensuring that all parts match up and preform like they should.

Building on budget for your FPV plane? Trying our promotional power combo.

Package including:

DragonFly MC1806 KV2300 motor x4  (US$19.99 ea.)

ZTW Spider 12a ESC x4 (US$7.99 ea)

Prop:5030 or 6030 (optional) 4 pairs,colors delivery at random(or you can leave a comment for what color you need)    ($4.90 ea for 5030, $10.90 ea for 6030)

Original Total US$131.52 & US$155.52

Please find more details on http://www.fpvmodel.com/promotion-power-combo-for-mini-multirotors_g755.html. Thank you.

FPV Model is a professional B2C supplier of FPV systems, FPV accessories and anything that related to FPV. If you are looking something special for your FPV plane, please do not hesitate to contact us.

Thank You All

FPV Model launched a promotion campaign for Dragonfly MC1806 Mini Motors since August 27th. The special offer lasted for 3 weeks and has just been ended yesterday. During the period, more than 3000 motors have been sold out.

Although the special offer has been ended. the service of FPV Model never end. Except these mini motors, we have many more FPV products sold at a very competitive price.

We’ll continue to offer the best FPV products with a best possible price. Most importantly, FPV Model does not only sell products, but offers a solution that related to FPV for our customers.

Thank you!